Festool MFT/3 Multifunction Table ,

Can easily be carried to a jobsite, due to its compact size and lightweight.
Accurate and repeatable cuts with the guide rail and plunge saw or routers.
Clamp faster with uniform holes and Festool clamps.

$685.00 (as of January 18, 2018, 9:36 pm)

Usually ships in 24 hours

Product ID: 1517 Categories: ,

Limited Quantity Special DealsMFT/3 THE EVOLUTION OF THE WORKBENCH Redesigned for 2008, the height has been adjusted to make work more comfortable. New V-groove channels make adjustments both faster and easier. Both the fence and the miter gauge have been redesigned for better stability and more accurate results. The MFT/3 has 85% more working area than the older MFT 800, and is 15% lighter than the MFT 1080. Even supposing the MFT/3 has many improvements, we did not abandon features that you have come to believe and enjoyfeatures like perforated tops, side channels for attaching clamps, and folding legs to allow two working heights, and easy transport.
The Festool MFT/3 Multifunction Table offers a portable, ergonomically designed workspace that’s ideal for everything from rough cutting to fine sanding and assembly. It offers a perforated top that’s easy to attach tools, guides, and work pieces to, side channels for attaching clamps, and folding legs that allow you to choose from two working heights. More than just a table, this kit includes an adjustable stop, an angle unit (protractor head), a fence rail and fence rail clamp, an FS 1080 guide rail, and two guide rail supports.

callout box top
Multifunction Table
At a Glance:

  • Perforated top and integrated side rails offer configuration options
  • Ergonomic table height helps you work comfortably
  • Large 43-3/8-inch by 28-1/4-inch workspace
  • Support loads up to 260 pounds
  • Folding design is sturdy yet easy to transport
callout box bottom
Festool MFT/3 Multifunction TableAngle stop stabilizes fence end to ensure accurate cuts. View larger.
Festool MFT/3 Multifunction Table

Perforated work surface and integrated side rails offer a wide variety of clamping configurations. View larger.
Festool MFT/3 Multifunction Table

Integrated T-Groove side rail lets you easily connect two or more Multi-Function Tables. View larger.
Festool MFT/3 Multifunction Table

Angle unit removes and attaches easily, remains stationary when needed, and has detents for common angles. View larger.
Angle StopRubber feet protect floors and prevent movement.
Threaded InsertThreaded inserts protect work surfaces.
ErgonomicsErgonomically positioned tensioning knobs.

Large, Versatile, and Portable Work Area
Built to be sturdy, the Festool MFT/3 Multifunction Table offers a workspace that measure 43-3/8-inches by 28-1/4-inches, and can reinforce loads up to 260 pounds. Whether you’re cutting, routing, sanding, or simply prepping materials for assembly, this ergonomically designed table places your work at the perfect height of 35-7/16 inches, so you’ll be able to focus on the task at hand instead of worrying about back strain or awkward tool positioning.

If you wish to have more workspace than a single table offers, the table’s integrated T-groove side rails can be used to quickly and easily connect two or more Multi-Function Tables to one another. Optional connectors (not included) fit into the side rails to create a sturdy, gap-free bridge.

The multifunction table weighs 54 pounds, allowing you to move it around your workshop or transport it to and from job sites.

Perforated Top Makes Clamping Easy
Designed to work with a large assortment of Festool clamps, the MFT/3 Multifunction Table offers a wide variety of clamping configurations that are ideally suited to both traditional materials and awkward, or oddly shaped, materials.

The table’s perforated work surface offers plenty of attachment points. And even as previous models of the Multifunction Table used a coarse wood screw for attaching the top, this most recent incarnation offers threaded inserts. These inserts not only prevent damage from over-torquing, but also establish a reference point that makes attaching the top quicker and easier.

Folding Legs Offer Safety, Utility, and Easy Transport
Folding legs make transporting the MFT/3 Multifunction Table to and from job sites easy by providing it with a lightweight, compact profile. The tensioning knobs for the legs are placed far enough from the sides of the table so that you don’t have to worry about pinching or banging your hands as you protected the legs. And even as you’re working you don’t have to worry about the table sliding or marking floor surfaces, thanks to the rubber foot caps on the legs.

By allowing you to place the work surface cleanly on the ground, the table’s folding design also offers a second workable configuration that’s ideal for keeping your tools and clamps at hand for applications like installing flooring.

Includes Guide Rail, Angle Unit, and Angle Stop
Able to deliver precise, splinter-free cuts that are safer than cuts made with a conventional table or radial arm saw, the MFT/3’s integrated guide-rail system allows you to make accurate cuts up to three inches deep. Plus it can handle materials that measure up to 27-9/16 inches wide.

In addition, the included angle unit allows for precise, repeatable cuts. Featuring detents at common angles and an easy-to-adjust design, this unit allows you to leave the guide rail and saw in one place even as repositioning the work piece and fence. Compared to a miter saw setup where the entire saw head must be repositioned, this saves you time and frustration when it comes time to change cut angles. Plus the angle nit attaches to the table the usage of the V-Groove side rail, enabling easy repositioning, removal, or reattachment.

Also included is an angle stop, which also attaches to the Multi-Function Table the usage of the V-Groove side rail. This stop prevents movement of the angle unit by stabilizing the end of the fence, and it can easily be removed or repositioned the usage of a simple, protected locking knob.

The Festool MFT/3 Multifunction Table is backed by a three-year limited warranty and a 30-day money-back guarantee.

What’s in the Box
Festool MFT/3 Multifunction Table, adjustable stop, angle unit (protractor head), fence rail and fence rail clamp, FS 1080 guide rail, and two guide rail supports.

 

Festool MFT/3 Multifunction Table



Can easily be carried to a jobsite, because of its compact size and lightweight.
Accurate and repeatable cuts with the guide rail and plunge saw or routers.
Clamp faster with uniform holes and Festool clamps.
Use with legs folded out, at full height, or folded in and set on the floor.
Cost effective, durable, long lasting design that offers maximum versatility.

Reviews

There are no reviews yet.

Be the first to review “Festool MFT/3 Multifunction Table”